Manual Fire Alarm TN005

The Argina Technics manual fire alarm is a super safe product because there is no danger of injury by glass splinters: the polycarbonate window does not break but clicks in when operated.

• No broken glass when activated
• Resettable with key supplied
• Installer-friendly fitting
• Good feedback on activation
• Built-in short-circuit isolator
• Addressable via Laserbox remote control
• Easy to test
• Two-wire system
• Operationally reliable
• Optional transparent cover

There is no danger of injury by glass splinters: the polycarbonate window does not break but clicks in when operated. There is good feedback upon activation with a tangible click, the illumination of a red LED and the appearance of the text ‘activated’.

The module communicates continuously with the control panel and takes care of passing the status of the manual alarm and enabling or disabling the further loop.

If a short circuit occurs in the loop, only that part of the loop between two isolators will be disabled.

The location of the short circuit can be found quickly from the indication on the alarm control panel.

The module has its own encoding number, which can be set quickly from the Laserbox remote control.

The module can be tested easily by pressing it in, after which the polycarbonate window can be reset with the key supplied.

Available with transparent cover, ideal for use in schools, public areas, food-processing areas, and anywhere there is a chance of accidental activation and a need to reset to monitoring mode.